TIME LAPSE TUTORIAL AND TEMPLATES (By Adobe) - Planning and shooting photos
Page 2 of 6
Planning and shooting photos
Plan and shoot the photos for your time-lapse video. If you’ve planned and shot your photos well, you’ve already won half the battle. Always keep the final output in mind when you plan your shoot. Take care of the following things when you plan the shoot:
- Shooting for time-lapse takes a lot of time. Ensure that your camera battery is fully charged for a long shoot. It will be better if you have some spare batteries with you.
- Depending on the file format setting (RAW or JPEG), the memory required for the shoot will vary. Ensure that you have sufficient memory for the shoot.
- You need an intervalometer to shoot photos at a specific time interval. You can use an external intervalometer if your camera does not have an in-built intervalometer.
- You need a good-quality tripod for the shoot. Having a sturdy tripod ensures that you get stable frames for your time-lapse video.
- Always take some test shots and check your composition and setting for the shoot. Once you are sure about the ideal settings, use the same settings for shooting photos in manual mode. This ensures that the camera doesn’t set exposure and metering for each frame automatically. It is advised that you turn off the auto-focus feature, shooting with auto-focus takes additional battery and may create glitches in the video clip.
- You can decide the interval between two shots depending on what you are shooting. For example, if you are shooting fast-moving clouds, you may choose to have an interval of 5-10 seconds between each shot. However, if you are shooting a slow process like a blooming flower, the interval between two shots could be a few
- You need to calculate the total number of frames required for your time-lapse video based on the interval between the two shots. Here’s a blog by Julieanne Kostthat can help you calculate the frames for your time-lapse video.
- Hits: 4589